5
1. On/Off buttons for two speeds
2. Lid with motor unit
3. Plastic lid
4. Blades
5. Beater
6. Glass bowl
Important information:
1. Do not operate the device continuously for more than 10 seconds, after which time leave it for 3
minutes to cool.
2. Do not operate the device when the bowl is empty.
3. Remove all protective elements and thoroughly clean the device before the first use.
USE:
1. Place the bowl (6) on a flat and stable surface.
2. If you would like to chop or grind some ingredients, use blades (4). If you would like to beat some
liquid or egg, use beater (5). Place the blades (4) or beater (5) on the guide pin in the bowl (6).
3. Pour the ingredients into the bowl (6).
NOTE: Do not grind pieces of hard ingredients like coffee beans or chocolate.
4. Secure the lids (2 and 3). Make sure the lid is put on properly.
5. Connect the device to the power supply.
6. Turn on the motor by pressing the On/Off switch (1).
7. When you have finished using the device, disconnect it from the power supply.
CLEANING AND MAINTANACE:
1. Always disconnect the device from the power supply before cleaning.
2. Wash the glass bowl, the plastic cover and the blades in warm water with a mild detergent.
3. Wipe the motor unit with a damp cloth.
CPG601
To Next Page
Loading...