Other uses can be dangerous to users and can cause damage to
the device. Do not use the device for felling trees, for cutting
materials other than wood and wood-based materials.
If a crossed-out waste bin symbol appears on the appliance, this indicates that the product is covered
by European Directive 2012/19/EU. Familiarise yourself with the requirements of your local electrical
and electronic waste collection system. Follow your local regulations. Do not dispose of this product
with household waste. Proper disposal of the old product will prevent potential negative effects on the
environment and human health.
Information on environmental protection
The packaging contains only the necessary elements. Every effort has been made to ensure that the
three packaging materials are easy to separate: cardboard (box), polystyrene foam (internal
protection) and polyethylene (handbags, protective sheet). The device is manufactured from
recyclable materials and can be used again after its disassembly by a specialized company. Observe
local regulations for the disposal of packaging materials, waste batteries and unnecessary equipment.
The product is manufactured from high quality materials and components that can be recycled and
reused.
CS3010 4010
10. Finger guard
11. Power cord
12. Hook for the power cord
13. Air filter housing
14. Chain tensioner (SDS)
15. Transmission guard mounting nut
16. Transmission guard
17. Oil level window
18. Power on/off switch
Design of the electric chain saw.
1. Handle
2. Chain lube oil reservoir
3. Chain brake lever
4. Guide bar
5. Chain
6. Guide bar lubrication holes
7. Auxiliary handle
8. Housing
9. Switch lock button
7
To Next Page
Loading...