EN
6
6. Call functions
6.1. Make a call
When the network service provider name appears on the display,
the phone is ready to make and receive calls.
In Standby mode, press the number keys to enter the number
you want to call, press the right soft key to clear the wrong
numbers, press the left soft key or the dial key to start the call if
the specified number is correct.
To enter an international phone number format, press and hold
the [*] key until "+" international call sign appears on the display.
6.2. Receive call
When an incoming call is alerted to your device if your service
provider supports the number display, the display shows the
caller's number or the caller's name (depending on whether you
have saved it in the phone book).
1. Press the dial key or the left soft key and answer [Answer] to
the incoming call.
2. If Any key responds function is active, [Settings / Call Settings /
Advanced Settings / Answer mode / Anykey], you can answer any
call using any key except the Right softkey and the End / Off
button.
3. When the headset is connected to the unit and [Headset] is
activated [Settings / Call settings / Advanced settings / Answer
mode / Auto answer in headset mode], incoming calls will be
automatically received by your phone after 5 seconds of
vibration or ringing.
4. If you do not want to answer the call, press the End / Off
button to reject the call.
The End / Off button can also be used to disconnect the call.
5. During a call, press the down / up navigation keys to reduce or
increase the loudspeaker volume.
To Next Page
Loading...
Need help?
General
