Blaupunkt FRANKFURT RCM 82 - Radio Controls and Features; Tape Playback Functions

19
Frankfurt RCM 82
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Front Panel Description
1 ON/OFF
Switch on the set by turning the knob.
Volume control:
by turning the knob
SCAN (search operation):
Pressing the knob for approx. 1 sec. will
either sample the programmes to be recei-
ved during radio operation or the follow-
ing CD songs during CD operation (CD
changer only).
2 GEO button (broader interior sound
impression)
Balance (left/right volume):
Adjust with rocker switch <</>> I.
Fader (front/rear volume):
Adjust with rocker switch
/ J.
3 AUD button
Treble - Reproduction of the high fre-
quencies
Adjust with rocker switch <</>> I.
BASS - Reproduction of the low fre-
quencies
Adjust with rocker switch
/ J.
4 LD button (Loudness)
Press this button to boost the bass fre-
quencies at low volumes. This will lead to
a more natural sound impression.
5 DSC button (Direct Software Control)
This button is used for programming
special functions of your car stereo.
6 AF button
When AF is on and RDS activated, the
radio will automatically tune to a fre-
quency offering better reception of the
same programme.
7 lo button
This button is used for altering the sen-
sitivity of the automatic station seek
operation
lo - normal sensitivity (“lo” G e is indi-
cated)
dx - high sensitivity (“lo” G e disap-
pears)
Additional function of the lo button:
Switching from stereo to mono: Press
for longer than 2 seconds.
8
button (Dolby-NR)
Use this button to activate noise
suppression during tape playback.
9 MTL button (metal)
Press this button when chromium dioxi-
de (CrO
2
) or metal cassettes are play-
ed. Switch off this function by
pressing the MTL button once again.
: button (Autoreverse)
Automatic change from one side of the
tape to the other
; Cassette compartment
< FR button
Fast rewinding of the tape.
Stop with FF button.
= Cassette eject
Press both buttons.
> FF button
Fast forwarding of the tape.
Stop with FR button.
? RM button (Radio Monitor)
Use this button to listen to the radio
while advancing or rewinding the tape.