29
Freiburg RCM 45
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
BEEP Confirmation tone for all
functions which require a
button to be pressed for
more than 2 seconds.
The volume can be adju-
sted from between 0 to 9.
(0 = off)
Each alteration of this va-
lue is confirmed by a beep
tone of the corresponding
volume.
LED (code) You can adjust the Key-
Card tongue C to flash for
extra anti-theft protection.
LED 1 - LED always flas-
hes when the unit
has been swit-
ched off via the
ignition and the
KeyCard remo-
ved.
LED 0 - No flashing.
LOUD Loudness - When listening
at a low level, the Loud-
ness function creates a
more natural sound by
boosting the low frequency
range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
RM (Radio Monitor)
With RM-ON, the unit will
automatically switch to the
tuner whenever the casset-
te is fast winding.
RM-OFF - The function is
switched off.
To quit the DSC programming mode and
store the adjustment:
• Press DSC.
If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.
Overview of the DSC factory
settings
LOCAL : 1
DIS : 1
TIME : OFF
TA VOL : 4
BEEP : 3
LED (Code) : 1
LOUD : 4
RM : OFF
To Next Page
Loading...
