EasyManua.ls Logo

Blaupunkt GT4000 - User Manual

Blaupunkt GT4000
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WARRANTY
This product has 3 years warranty for manufacturing defects. The warranty period
will be counted from the date of purchase of the product, according to purchase
invoice. Product warranty only covers manufacturing defects, defects resulting from
improper use, such as dropping, improper transportation, connection to the mains
power supply not in compliance with the voltage specied in this manual, insertion
of foreign objects and natural wear of parts and parts Such as plastic parts (caps,
buttons, handles, latch locks, power cables, etc.) and metal parts (wires, motors, etc.).
Also not covered are damages due to agents of nature, lightning, ood, sea,
oxidation, humidity etc.). The product will lose its warranty if it presents defects,
which after analysis by our technicians, are characterised as being improperly used,
used for professional use or for the purpose for which it is not intended (according to
the Owner's Manual). This warranty will be void if it is found that the device has been
tampered with, has been repaired by a person or service not authorized by
Blaupunkt. The guarantee is only valid with the receipt/invoice provided at purchase.
Blaupunkt undertakes to provide the above-mentioned services in the warranty
period only in places where it maintains an authorised service. Consumers who are
not located near an authorised service centre should be responsible for the costs and
risks of transport to the authorized service of their choice.
Natural wear is not covered under warranty.
This product is for domestic use only.
Lawn Trimmer GT4000
INSTRUCTION MANUAL
To prevent injury or damage, read
and follow all instructions in this
manual before using the appliance.
Imported and Distributed by SKN Innovations Ltd. for Blaupunkt
17 Nd Sq.
NE30 1PX
Registered in the UK - Company Number 10366861
0800 677 1923
customerservice@bp-tools.co.uk
www.bp-tools.co.uk
SAVE THESE INSTRUCTIONS

Questions and Answers

  • L
    Lynn MosesAug 3, 2025
    What to do if my Blaupunkt GT4000 stops and won't start again?
    • N
      Nancy WilliamsAug 3, 2025
      If your Blaupunkt Trimmer stops and won't restart, it could be due to a unit failure, in which case you should contact your dealer to check for damage. Alternatively, the plug might be damaged, so check the plug.
  • V
    Vanessa SanchezAug 10, 2025
    Why is the cutting head on my Blaupunkt GT4000 Trimmer hard to turn?
    • A
      Amy BoyleAug 10, 2025
      If the cutting head of your Blaupunkt Trimmer is hard to turn, it's likely due to grass wrapped or built up around the head. To resolve this, clean the affected parts of the machine.
  • D
    Dennis BradleyAug 18, 2025
    Why does grass wrap around the shaft of my Blaupunkt Trimmer?
    • M
      Michael Bowers MDAug 18, 2025
      If grass wraps around the attachment shaft and the trimmer head assembly of your Blaupunkt Trimmer, it's likely because you are cutting tall grass at ground level. To prevent this, cut tall grass from the top down.
  • A
    Audrey BrownAug 26, 2025
    How to fix the line if it will not advance on my Blaupunkt Trimmer?
    • A
      angelasmithAug 27, 2025
      If the line of your Blaupunkt Trimmer won't advance when you restart the machine, several factors could be at play. It could be that the line is welded to itself, in which case you should lubricate it with a silicone spray. Another possibility is that there's not enough line on the spool, so install more line. The line might also be worn too short, so pull the lines while alternately pressing down on and releasing the bump button. Finally, the line could be tangled on the spool, so remove the line from the spool and rewind it.

Summary

Warranty Information

General Safety Warnings

Workplace and Personal Safety

Keep workplace tidy, avoid damp/wet conditions, keep visitors away, store tools safely, dress properly, use safety accessories.

Safe Operation and Maintenance Practices

Disable idle tools, avoid unintentional starting, use outdoor extension cords, stay alert, check for damaged parts, guard against electric shock, use approved parts.

Additional Safety Guidelines

Safe Usage and Handling

Ensure correct voltage, use care during assembly, never point cutter head at people, switch off if vibrates, be aware of rotation after switch-off.

Operational and Cord Safety

Remove obstacles, cut correctly, avoid roads, cut slopes across, no metal line, avoid rain, use daylight, keep footing, cord safety.

Safe Operation Techniques

Tool Handling and Environment

Use tool upright, move slowly, avoid slippery conditions, do not work on steep slopes, do not cross paths, never touch running line.

Operational Checks and Guards

Wait for standstill, use correct cutting line, avoid line trimming blade, keep cable away, keep hands/feet away, use with guards, keep ventilation clear.

Operations: Adjustments and Conversion

Mains Power Connection

Guidance on connecting the unit to the mains supply and appropriate circuit breakers.

Maintenance and Storage

Troubleshooting and Specifications

Blaupunkt GT4000 Specifications

General IconGeneral
BrandBlaupunkt
ModelGT4000
CategoryTrimmer
Voltage220-240V
Blade MaterialStainless Steel
ColorBlack

Related product manuals