Blaupunkt GTr 130 A - Wiring Diagram; Diagram 1 (High Level Input); Diagram 2 (Low Level Input)

Speaker Size : 214.5mm x 135mm
Cone Composition : Aluminium
Magnet Type : Ferrite
Enclosure Housing Material : Aluminium
Remote Controller : Wired
DC Cord : 5.0m
Screws (Parker-Type) : M4 x 20mm
Screws (M-Type) : 6 x 8mm
2 x Bracket A : 72 x 40mm
Overall Net Weight : 3.7kg
Enclosure Dimension (L x W x H) :
280 x 200 x 74mm
Select either Diagram 1 or Diagram 2 for installation. Avoid audio interference by using one audio inputs
only.
WIRING DIAGRAM
Diagram 1
(High Level Input)
REMOTE CONTROL
YELLOW WIRE
BLUE/WHITE WIRE
NOT IN USE IN THIS TYPE OF INSTALLATION
NOT IN USE IN THIS
TYPE OF INSTALLATION
GREY/BLACK (-) & GREY WIRE (+)
SPEAKER RIGHT CHANNEL
OUTPUT WIRE
SPEAKER LEFT CHANNEL OUTPUT WIRE
WHITE/BLACK (-) &
WHITE WIRE (+)
FUSE
10A
BATTERY
12V
CONNECT BLACK WIRE (-) TO THE CHASSIS OF THE VEHICLE
CHASSIS GROUND
Diagram 2
(Low Level Input)
REMOTE CONTROL
YELLOW WIRE
BLUE/WHITE WIRE
RCA SIGNAL WIRE
AUDIO DEVICE CONTROL WIRE
CONNECT BLACK WIRE (-) TO THE CHASSIS OF THE VEHICLE
FUSE
10A
BATTERY
12V
CHASSIS GROUND
GTr 130 A Manual.indd 5 25/1/2019 2:37:11 PM