EN
11. Bluetooth® Connection Setup
Bluetooth®
The Bluetooth® function allows mobile phones and media players with
Bluetooth® to be connected wirelessly to the car radio for telephoning
and music playback (Bluetooth® audio streaming).
To pair a supported device with your car radio, use the functions
described in the following sections.
Hands-free calling via the radio is also available when the car radio is
switched off but the ignition is switched on. When the ignition is
switched on, the radio connects to the mobile phone and, when an
incoming call is received, the car radio automatically switches on so that
the call can be answered. This function can be deactivated, see section
SETTINGS | MENU.
Establishing a Bluetooth® connection
Switch on the car radio, open the Bluetooth® settings on the Bluetooth®
device and search for available devices. Connect the car radio found BP
SQM23 according to the procedure described in the Bluetooth® device
manual.
After a successful connection is established, the car radio briefly displays
CONNECTED, followed by the name of the connected device, and the
small Bluetooth® symbol on the display lights up.
Confirm any messages prompted on your smartphone immediately,
otherwise some features may be limited, unavailable, or the pairing
process may fail.
This is required only once, the devices will automatically reconnect
one to another when they are in range.
At the time of marketing of this unit, extensive testing of Bluetooth®
features was conducted with various smartphones and media players to
ensure the highest possible compatibility. However, some features may
be limited or not work at all, depending on the actual external device in
use. In case of such problems, please check if an update is available for
your device or car radio.
If the car radio or a connected Bluetooth® device has received an
update, the Bluetooth® connection should be completely deleted and re-
established in the event of problems.
The car radio remembers the last 5 Bluetooth® devices and
automatically reconnects to the most recently connected and available
Bluetooth® device. Before connecting another Bluetooth® device,
disconnect the already connected device. The automatic reconnection of
the last 5 Bluetooth® devices after switch-on takes less time for the last
Bluetooth® device connected to the car radio than for other previously
connected Bluetooth® devices.
Other Bluetooth® devices (such as Bluetooth® headphones or
receivers) that are used with the phone for hands-free calling or music
streaming should be switched off when the phone is connected to the
radio to avoid possible conflicts or malfunctions.
To Next Page
Loading...
