7
CLEANING AND MAINTENANCE
Never immerse the iron in water. Make sure the iron has cooled down. Wipe the body of the iron with a
slightly damp cloth, then wipe until it is dry. The soleplate should be wiped with a soft cloth.
Regularly use the self-cleaning function (cleaning is recommended every 2-4 months, depending on
the hardness of the water).
To use the self-cleaning function, fill the water tank to the maximum level. Connect the iron to the
power supply, set the maximum temperature value and the highest steam intensity. Wait until the iron
reaches the set temperature and the pilot light goes off. Unplug the iron from the power source. Hold
the iron in a horizontal position over the sink. Press and hold the self-cleaning button. Steam and very
hot water will start to come out of the openings of the soleplate. Keep the self-cleaning button pressed
until the tank is empty and gently sway the iron back and forth.
HSI401
To Next Page
Loading...
Need help?
General
