Important note:
1. The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses.
2. You can get how to use Spotify instruction found here: https://spotify.box.com/s/7m8g1ij260oxt8zlhy5cult0gmkknu6t.
3. Use your phone, tablet or computer as a remote control for Spotify. Go to www. spotify.com/connect to learn how.
4. Both the Spotify APP of mobile phone and Internet radio device should connect same Wi-Fi network during operation.
Internet radio APP operation
a.For iOS device, search and down load “ AirMusic Control” in APP store (download and install “ AirMusic control” for Android
device).
b. Power on the unit, enter main face>configuration>device>APP, a QR code will appear on the display, scan it by your mobile
phone.
c. select and open up the “AirMusic control” APP on your mobile phone, the APP can scan and connect with Internet radio
automatically in case both mobile phone and Internet radio device connect and use the same Wi-Fi network. (IR50DAB will
show in the device name list of configuration menu in AirMusic Control APP after connected).
d. then you can use the APP on your mobile phone to control the internet radio remotely.
Important note:
1.We suggestion do not use the front button or remote control to control the unit at same time or frequently while you use APP
for controlling, which may cause synchronization issue due to Internet server/speed etc. It is not include in our warranty
service. In case happens, please remains the unit without further operation for listening a while in order to get recovery.
Line out and headphone
The unit provides line out jack which allow to wire connect with other active speaker or headphone. Using the supplied 3.5mm
stereo audio cable plug into the line out jack on rear panel, and the other terminal connect to other relative audio player. Power
on the unit and get audio playing, then the sound will output from outsourcing audio player, but mute on radio side.
Plug on the headphone connector into the lineout jack, you can get the sound output from headphone, but mute on radio side.
During line out playing, you can adjust the volume output level both on radio and outsourcing player, but major on radio side.
Time & alarm setting
Time/Calendar: enter main face>configuration>date & time>set date and time, get option for manual setup and auto detect. If
you select the auto detect, the time and date information will be updated once Wi-Fi network is connected. You can set up the
date and time manually in case of you select manual setup. To set up time or date format option is also available.
Alarm setting: Enter main face>configuration> alarm interface. Then you can set up the alarm time, NAP(Snooze) time, alarm
volume, alarm source etc. according to the options on display.
1. When the setup alarm time is being, the radio will wake up accordingly. Short press the standby button to cancel the alarm
voice. In addition, the alarm will wake up at same time next day.
2. Dual alarm is available for setting.
3. When the alarm is activated, short press other button (except standby) to active snooze function. In addition, the alarm will
wake up again when the snooze time is being.
4. The alarm function is only workable when the main power is connected and available.
5. While the snooze function is working, the remaining snooze time will show on display at same time. Short press standby
function to cancel the snooze.
Sleep
In playing mode(like internet radio, Bluetooth, USB playback mode etc), short press the sleep button repeatedly on remote
controller can switch and select the sleep time between 15/30/60/90/120/150/180/off mode. And the radio will off and switch
to standby mode automatically when the sleep time is being.
Weather information: There are able to show the weather information on display when in standby and Wi-Fi network
connected. Please enter the setting main interface>configuration>weather>set location>choose the city you want. Then the
radio can find and show the weather information accordingly.
Others
For further operation like dimmer, software version, factory default etc., pleaser reference below tree diagram in configuration
setting.
9
To Next Page
Loading...
