Blaupunkt KPT-S1 - User Manual

Wireless Remote Keypad with Proximity Tags (KPT-S1)
P
P
a
a
r
r
t
t
s
s
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
1. Active LED (Blue/Orange)
2. Status LED (Blue/Red)
3. Fault LED (Orange)
4. Away Arm Key
5. Home Arm Switch
6. Status Key
7. Disarm Key
8. Panic Alarm
Press both 1 and 3 key to trigger Panic alarm
9. Fire Alarm
Press both 4 and 6 key to trigger Fire alarm
10. Emergency Alarm
Press both 7 and 9 key to trigger Emergency alarm
11. Battery Insulator
12. Mounting Knockouts
13. Tamper Switch
The Tamper switch protects the PIR from unauthorized cover
opening.
14. RFID TAG
P
P
a
a
c
c
k
k
a
a
g
g
e
e
C
C
o
o
n
n
t
t
e
e
n
n
t
t
1 x Remote Keypad
2 x wall plugs and screws
2 x RFID Tags
1 x 3V lithium batteries (pre-installed)
For learning the Remote Keypad:
1. Put the Control Panel into learning mode.
2. Press both # and  keys to transmit learn code
3. Refer to Control Manual to complete the learning process.
The Remote Keypad has 2 knockouts on the back where plastic
is thinner for wall mounting.
1. Use the two knockouts on the back to mark position on the
wall at chest height. Open the back cover.
2. Drill holes into the wall using the knockouts as template.
3. Fix the keypad base onto the wall with the screw and plugs
provided.
4. Replace the keypad cover onto the base.
S
S
t
t
a
a
n
n
d
d
b
b
y
y
M
M
o
o
d
d
e
e
The Remote Keypad features a power saving feature. When no
key is pressed for 5 seconds, the Remote Keypad will turn off
automatically to conserve power. When any key is pressed, the
Remote Keypad will wake up and turn on Active LED to indicate it
is now under normal operation
K
K
e
e
y
y
p
p
a
a
d
d
S
S
e
e
t
t
t
t
i
i
n
n
g
g
The Remote Keypad features a Test (programming) mode for you
to customize its setting. Before you start using the Remote
Keypad, you should first finish configuration setting.
The Remote Keypad also feature a Keypad PIN code which is
used to access the Test mode, To enter Test Mode, Enter
“0000”(Default Keypad PIN code) + “＊” key, the Active Orange
LED will light up
Under Test Mode, the following functions include:
Key
Function
“＊” + “1”
Tag Management
“＊” + “7”
Transmit learn code (same as pressing
both # and  keys under normal mode)
“＊” + “2”
Enable dual key Panic Alarm function
L
L
e
e
a
a
r
r
n
n
i
i
n
n
g
g
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
Surface Fixing
Knockouts x 2

Summary

Parts Description

Package Content

Installation

Operation

Standby Mode

Explains the power-saving feature where the keypad turns off after inactivity, waking on key press.

Keypad Setting

Details how to access Test Mode and customize keypad settings using PIN codes and key combinations.

Keypad Configuration

Keypad PIN Code

Instructions on how to change the keypad's PIN code for accessing Test Mode.

Arming Modes

Enabling or disabling PIN code usage for arming, and selecting keypad PIN for arming.

Control Panel Status & Functions

Checking Control Panel Status

How to use the Status key and LED indicators to check the control panel's current mode.

Dual Key Alarm Function

Enabling Panic, Fire, and Emergency alarms via dual-key presses.

LED Indicators

Description of the Active LED and Status LED functions and their meanings.

Fault LED

Indicates faults detected in the alarm system, showing alarm in memory or system faults.

Battery and Reset

Battery

Information on the 3V lithium battery, low battery detection, and replacement procedure.

Factory Reset

Procedure to reset the Remote Keypad to its factory default settings.

Specifications

Blaupunkt KPT-S1 Specifications

General

Connectivity technology	Wireless
Quantity	1
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	0 - 85 %
Product color	White

Weight and Dimensions

Dimensions (WxDxH)	80 x 116 x 20.5 mm