Many thanks to purchase our mode, please read and reference the manual before operating this unit. Please keep the manual
for future operation reference.
Location of controls：
1-Volume/on/off；2- Timer1/2/Dimmer； 3- Alarm/memory/AMS(scan)；4- Display；5-Stereo/mono/light on/off；
6-Preset-/search –；7- Preset +/search +/setup；8-Timer；9-Foldable stand；10-Battery compartment；11- Speaker
12-Power cord；13-FM antenna
Install backup battery power: push out the battery compartment door (at the bottom of unit), insert 2 AA size batteries (not
include). Make sure that the inserted battery is in correct position according to the engraved positive and negative polarity
symbol. The battery power is use to backup clock and alarm setting only.
Note:
a. Please deposal the battery in environmental friendly way, please reference and follow the requirement by your local
government.
b. Please do not install the battery with mix up brand; please take out the battery in case of no operation in a long time to avoid
liquid leakage issue.
Using the unit on a table: You can put the unit on an even table. Pull out the stand to keep a better sight and adequate space
for sound, as the speakers are equipped at the bottom of the unit.
Wall-mount the unit
Important: You should only use the mounting accessories (included) when you mount the unit. Use of unapproved accessories
that have not been designed specifically for this unit may lead to safety hazards.
a. Retract the bottom stand before mounting the unit; use the provided cabinet mounting template to location where you want
to mount the unit. Drill the mounting holes directly then done, remove the template. To reduce the risk of danger, please
consult the technician if the location you want to mount the unit is firm enough to hold weights and safe before you do the
mounting.
3
To Next Page
Loading...
