Blaupunkt Laguna CD36 User Manual

11
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
RADIO MODE
Storing stations automatically
(Travelstore)
You can automatically store six stations
with the strongest reception in the re-
gion. The stations are stored in the FMT
or AM memory depending on the se-
lected frequency range.
Note:
● Stations that were previously
stored in this memory are deleted
in the process.
➮ Press and hold the BND•TS button
< until the seek tuning starts.
The station storing procedure begins.
“FM TSTORE” or “AM TSTORE” ap-
pears in the display. After the process
is completed, the station that is stored
in location 1 of the respective memory
bank will be played.
Listening to preset stations
➮ Select the memory bank in which
the station was stored.
➮ Press the preset station button
1 - 6 ; of the station you want to
listen to.
Scanning receivable stations
(SCAN)
You can briefly play all the receivable
stations by activating the scan function.
You can set the scanning time to be-
tween 5 and 30 seconds in the menu.
Starting SCAN
➮ Keep the MENU button 7 pressed
until the scan process starts.
“SCAN” appears briefly in the display
followed by the current frequency (which
flashes).
Stopping SCAN and continuing
listening to a station
➮ Press the MENU button 7.
Scanning is stopped and the station that
was tuned into last will remain active.
Setting the scantime
➮ Press the MENU button 7.
➮ Press the
or button 8 repeat-
edly until “SCAN TIME” appears in
the display.
➮ Set the required scantime using
the
or buttons 8.
When you have finished making your
changes,
➮ press the MENU button 7 twice.
Note:
● The set scantime also applies to
scanning in CD and CD changer
mode.
Setting the display
You can choose to continuous display
one of the followings:
● Band and Time
● Band and Frequency
➮ Keep the
DIS button : pressed
until the required display appears.
1BA_LaguCD36_gb 3/14/06, 2:25 PM11

Blaupunkt Laguna CD36 Specifications

General

Brand	Blaupunkt
Model	Laguna CD36
Category	Car Receiver
Language	English