OPERATION
PAIRING
1) On the mobile phone, select the
Bluetooth set up. (Please refer to the
instruction manual of your mobile phone
on how to operate Bluetooth.)
2) “CAR KIT” should appear in the list on
your mobile phone, please select
“Car KIT”. and then input “0000” ,If it needs
a password.
3) When successful paired, the BT mark
will be displayed on LCD.
Note:
The BT link incloud two links: phone
link and media link. You can check these
links in your mobile phone. Click the setting
of paired phone. You can see the “phone”
link and “media” link item as below. You
have to select them. If the “media” item was
not selected then the A2DP function will be
invalid.
Answering/rejectinganincomingcall
When there is a phone is coming in.
Press
key to answer the call. Press
key to reject the call.
Hangupacall
When finished a conversation press
key to hang up this call.
Checking phone book / received /
dialed / missed call (for Android and
Iphone mobile)
Press
MODE
key it will show “PHONE” on
the display. press
T-MENU
button (7) for 2
seconds. it will show BOOK on the LCD.
Then shortly press
T-MENU
button (7) it will
show items as below:
BOOK---RECEIVED---DIALED---MISSED---PH
ONE
In each item you can use
9/
button (24)
or
8/
button (23) to check
corresponding number. In the first time
your mobile will receive a message that
the unit will visit your mobile through
Bluetooth. You have to agree and press
“YES”to confirm.
(Note: It is necessary the phone number is in
the phone not in the SIM card).
Call out
1) Making an outgoing ca ll by
inputting the phone number
manually.
Press
MODE
key it will show “PHONE”
on the display. Short press
key. The
LCD will become BLANK. Then you can
enter phone number and press SEL (3)
key to confirm the dialing. (Note: If you
inputted wrong numbers. You can press
and hold
T-MENU
key to cancel wrong
numbers.)
In front panel except there are 0~9 digit.
please note */# as below:
*: press and hold 5 key for 2 seconds.
#: press and hold 6 key for 2 seconds.
10
To Next Page
Loading...
