20
Activating PTY
To use the PTY function,
➮ press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
➮ Press the softkey 4 assigned to
the “PTY” display item.
When PTY is activated, the display
shows the current programme type. The
programme types are displayed along-
side the softkeys 4.
Cancelling PTY
To cancel the PTY function,
➮ Whilst the programme types are
being displayed, press the softkey
4 assigned to the “OFF” display
item.
Selecting a programme type and
starting seek tuning
The PTY menu is made up of several
pages on which the known programme
types are displayed. To browse through
the PTY menu’s pages,
➮ repeatedly press the NEXT button
3 until the required programme
type appears alongside one of the
softkeys.
➮ Press the softkey 4 assigned to
the required programme type.
➮ Move the joystick 7 up/right or
down/left to start seek tuning.
The next receivable station correspond-
ing to your selected programme type will
then be tuned into. If no station is found
that corresponds to the selected pro-
gramme type, you will hear a beep and
“NO PTY” appears briefly in the display.
The radio will then retune to the station
that was received last.
Note:
If you want to switch back to the pro-
gramme types display,
➮ briefly move the joystick 7 in any
direction.
Optimising radio reception
Treble reduction feature during
interference (HICUT)
The HICUT function improves the sound
during poor radio reception. If interfer-
ence occurs, the treble is automatically
reduced thus reducing the interference
level.
Activating HICUT
➮ press the TUNER button < in ra-
dio mode.
The first page of the radio functions
menu is displayed.
➮ Press the NEXT button 3.
➮ Press the softkey 4 assigned to
the “HCUT” display item.
➮ Move the joystick 7 up/right or
down/left to adjust the HiCut.
“HICUT 0” equates to the lowest reduc-
tion of the interference level, “HICUT 3”
is the highest reduction.
➮ Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
RADIO MODE