MP3 MODE
Fig. 1 Fig. 2
I I
DO4
-TOO1
-TOO2
-TOO3
-TOO4
-TOO5
-TOO6
-TOO7
-E
-TO10
-TO11
Since using some burner software can
lead to inconsistencies in the way items
are numbered, you should ensure that
the root directory DO1 either contains
only subdirectories containing tracks
(Fig. 1) or only tracks (Fig. 2).
Each track can be named using the PC.
The directory name can be displayed
in the device’s display. Name the direc-
tories and tracks using your CD burner
software. The software’s operating in-
structions will provide details on how to
do this.
Note:
l
When naming directories and
tracks you should avoid using spe-
cial characters.
If you like your files to be in the correct
order, you should use burner software
that places files in alphanumerical or-
der. If your software does not provide
this feature, you can also sort the files
manually. To do so, you should place a
number (e.g. “OOl”, “002”, etc.) in front
of each file name - the leading zeros
must also be included.
MP-3 tracks can contain addition infor-
mation such as the artist, track and al-
bum names (ID3 tags). This device can
display ID3 tags if they are version 1.
Only MP3 files with the “*MP3” file ex-
tension can be played on this device.
Note:
To ensure uninterrupted playback,
do not attempt to change the file
extension to “.MP3” of any files oth-
er than MP3 files and then attempt
to play them!
Do not use “mixed” CDs containing
non-MP3 data and MP3 tracks.
Do not use mix-mode CDs contain-
ing audio tracks and MP3 tracks.
Switchins to MP3 mode
MP3 mode is activated in the same way
as normal CD mode. For further details,
please read the section entitled “Switch-
ing to CD mode / Inserting a CD” in the
“‘CD mode” chapter.
Selecting a directory
To move up or down to another directo-
ry,
0 repeatedly press the joystick @ up
or down until the number of the re-
To Next Page
Loading...
