61
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Setting the scanning time
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VARIOUS” display item.
➮ Press the softkey 5 assigned to
the “SCANTIME” display item.
➮ Move the joystick 8 up/right or
down/left to adjust the scanning
time.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
● The scanning time that you set is
also applied by the system to scan-
ning carried out in CD/MP3 mode
and CD-changer mode.
Storing stations
Storing stations manually
➮ Select the FM memory bank that
you want, i.e. FM1, FM2, FM3,
FMT or one of the MW or LW
wavebands.
➮ Tune into the station that you want
as described in the section entitled
“Tuning into a station”.
➮ Press one of the six softkeys for
longer than two seconds to assign
the station to that softkey.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
If your device is configured for the USA
region, you can also use the Travelstore
feature in AM radio mode. The stations
will then be stored in the AMT memory
bank.
Note:
Any stations that were previously stored
in this memory bank are deleted in the
process.
Starting the Travelstore function
➮ Press the TUNER button = while
in radio mode.
The radio functions menu appears in the
display.
➮ Press the softkey 5 assigned to
the “T-STORE” display item.
The storing procedure begins. “TRAV-
EL STORE” appears in the display.
After the process is completed, the ra-
dio will play the station that is stored in
location 1 of the FMT (or AMT) memory
bank.
Listening to stored stations
➮ Select the memory bank or wave-
band.
➮ Press the softkey 5 that is as-
signed to the station name or fre-
quency of the station that you want
to listen to.
RADIO MODE
To Next Page
Loading...
