15
BLUETOOTH OPERATION
PRE-PAIR FOR BLUETOOTH
OPERATION
(i) When use Bluetooth, please make sure
the mobile phone supports Bluetooth
function.
(ii) For the different kind of mobile phone,
Bluetooth emissive power has some
difference. To get the best conversation
quality, it is commended that the distance
between the mobile phone and the unit is
within 3m. And please don’t put any metal
object or any obstacle between the path of
the mobile phone and the unit.
PAIRING
1) On the mobile phone, select the
Bluetooth set up. (Please refer to the
instruction manual of your mobile phone on
how to operate Bluetooth.)
2) “CAR KIT” should appear in the list on
your
OPERATION
mobile phone, please select “CAR KIT”
and then input password “0000”. If it needs
a password.
3) When successful paired, the BT mark
will be displayed on LCD.
Answering / rejecting an incoming
call
When there is a phone is coming in. Press
key to answer the call. Press key to
reject the call.
Hang up a call
When finished a conversation ,press
key to hang up this call.
Checking phone book / received /
dialed / missed call (for Android and
Iphone mobile)
Press SRC key it will show “PHONE” on
the display. press button it will
show BOOK on the LCD. Then
repeatedly press it will show items as
below:
BOOK---RECEIVED---DIALED---MISSE
D---PHONE
In each item you can use button or
button to check corresponding
number.
Note: In the first time your mobile will
receive a message that the unit will visit
your mobile through Bluetooth. You have
to agree and press “YES” to confirm.
(Note: It is necessary the phone number is
in the phone not in the SIM card).
Call out
1) Making an outgoing call by inputting
the phone number manually.
Press SRC key it will show “PHONE” on the
display. Press and hold key. The
LCD will become BLANK. Then you can
enter phone number and press
key to
confirm
the dialing. (Note: If you inputted wrong
numbers. Press the
key to cancel
wrong numbers.)
In front panel except there are 1~6 digit.
please note 0/7/8/9/*/# as below:
0: DISP button.
7: EQ
8:
9:
*: press and hold 5 key for 2 seconds.
#: press and hold 6 key for 2 seconds.
1) Redialing an outgoing call
Press SRC key it will show “PHONE” on the
To Next Page
Loading...
