FM radio operation
Before start the FM radio listening, please check if the FM antenna is plugged into the rear FM socket properly; Full extent the
FM antenna or move the unit next to the window in order to better FM reception.
1. Auto scan and preset radio station: Press the source button repeatedly to enter the FM radio mode; press and hold the stop
button 2 seconds from remote control or front panel to scan and save the available radio station automatically. The unit can
save up to 40 (max) preset stations.
2. Preset station picking up: in radio mode, press the previous and next button from remote control or front panel of main unit
to pick up the preset station.
3. Manual tune or auto scan: short press the tune +/- button to increase or decrease 0.05MHz frequency per step base on the
current station; press and hold the tune +/- or next and previous button on front panel 2 seconds to auto scan the available FM
station in upward or downward frequency, will stop and play the available station automatically.
4. Station memory manually: using the tune +/- button to tune the favorite station that you desire to save; press the memory
button from remote control first, then the preset station digits will flare on display, press the previous and next button to
switch the preset station location that you desire to save; Then press the memory button to confirm it; and the current FM
station will be saved. Please repeat the operation to save other station.
Notes: the unit will show the available preset station only.
USB operation
The product includes USB playback function which can decode and play the music from a USB storage device. Before start the
operation, please copy the MP3 format music into a USB stick. The max supported USB stick device is up to 32 GB.
1. Before start the USB playback, please make sure the USB stick was plugged properly into the USB port. Then switch to USB
playback mode by press the source button. Then unit will decode and start to play the music automatically after few seconds.
2. In USB mode, you can achieve the play and pause, stop, mute, repeat, track selection, EQ, fast-forward and fast-rewind
function etc. Please reference the operation from the general operation part on this manual.
Notes:
a. Connect the USB stick by a USB extension cable for playback is not recommended which may produce noise or intermittent
sound due to audio data loss during transfer.
b. Decode and playback all MP3 format music is not guaranteed.
c. The max supported USB device is 32GB.
d. Some USB sticks may take a little long time to playback; please kindly note this is not malfunction.
Bluetooth operation
This product includes Bluetooth function which can wireless playback the music from other Bluetooth device.
1. Press the source button repeatedly enter to Bluetooth mode, the display will show “ BT” in Bluetooth mode. Enable the
Bluetooth function and start to search available device on your Bluetooth device (please reference the device manual for
operation), then check the available Bluetooth device list on your device.
2. Select “ BP MC200BT” for pairing; a short notice sound will comes out from the speaker after the Bluetooth paired
successfully.
3. Select and play the music from your Bluetooth device, then the music will output from the micro system.
4. Press the previous/next button can select last and next track during playing. Press and hold the unpair button 5 seconds can
disconnect and quit the unit with current paired Bluetooth device.
5. In Bluetooth mode, you can achieve play/pause, mute, EQ etc. function. Please reference the operation from the general
operation part on this manual.
Notices:
a. All Bluetooth devices are not guaranteed for pairing successfully due to different design and brand.
b. The best working distance of Bluetooth is within 10 meters without any obstacle in between.
c. The unit only can pair and work with one Bluetooth device in one time.
d. Please quit the current Bluetooth pairing before pair with other device, otherwise the “ BP MC200BT” will not show on the
device list.
AUX IN/line in/MP3 link and headphone operation
In order to wired playback the music from other player or source, please follow up below operation.
1. Using the audio cable( not include ) connect the AUX IN/LINE IN jack(depends on 3.5mm stereo or RCA type jack)on main
unit, and the another terminal connect with line-out or headphone jack of outsourcing player.
2.Select the music and play on your player, then the sound will output from the micro system.
3. In AUX IN/LINE IN playback mode, the main control is on the outsourcing player side. But you also can control the volume, EQ
mute the sound on the micro system side.
Headphone: plug the headphone connector into the headphone jack on front panel, then the sound will silence in micro
system, but output from the headphone. Adjust volume setting on micro system or headphone to get the comfortable sound
level for listening.
Karaoke
The unit includes microphone function which allow you to sing a song at home or music party. Insert the wired
microphone(included) into the microphone input jack which locates on the rear panel of main unit, then adjust the
microphone output level properly by turn the volume control knob(locates on the rear panel of main unit. And you can start to
sing.
8
To Next Page
Loading...
Need help?
General
