Remote control battery installation
Open up the battery door and insert 1 x AAA battery(included) into the compartment; please make sure the polarity of battery
will aim and correspond to the positive and negative engraved symbol in the compartment. Then close the battery door.
Notes:
a. The best working distance of remote control is within 7 meters without any obstacle in between. Please aim to the remote
control sensor locates on the left corner of display during operation.
b. The sensitivity of remote control will become weak when the battery power exhausted. Please replace it with fresh one for
operation.
c. Please take out the battery in case of none-operation in a long time.
d. Please dispose the battery in an environment friendly way. Please reference the local government requirement for the detail.
General operation
1. Power on/off and standby: The red color power LED will light on when you connect it with AC power successfully; please
remove the AC plug for complete power off. Press the power button on front panel or remote control for standby on and off
switching.
2. Mute: press the MUTE button on remote control to silence the sound output; press it again to resume the playing. You can
also resume the playing by press the volume +/- button.
3. Play mode selection: press the SOURCE button repeatedly to switch the play mode between CD/USB/FM radio/AUX
IN/Bluetooth/LINE IN.
4. Volume adjustment: press the VOL+/- button from remote control or turn the volume knob on the front panel to increase or
decrease the output volume.
5. Sound equalizer: press the EQ button to switch the playing equalizer mode between POP/ROCK/LATIN/JAZZ/FLAT.
6. Folder +/-, 10+/- button: Press 10 +/- button can skip the playing track by increase or decrease 10 in case of over 10 tracks
inside and get fast selection; press Fold +/- button to switch the playing track by folder in case of over 2 folders inside. The
function is available in CD and USB playback mode.
7. Play,pause and stop:In CD/USB/Bluetooth mode, press the play and pause button to pause or resume the playback; In CD
and USB mode, press the stop button to stop the playback, and press play button for music playback resuming.
8. Previous and next, Fast-forward and fast-rewind: short press it skip to last or next track for playback; Press and hold it to
fast-forward or fast-rewind current playing track, and resume to normal playing after release the button.
9. Repeat playback: In CD and USB mode, press repeat button repeatedly for repeat one, repeat all, repeat folder( in case of
folder inside) and repeat off selection;
10. Random playback: press random button for shuffle and shuffle off playback.
11. CD disc eject: Press it to load a CD or close the CD door.
12. Treble and bass adjustment: short press the treble/bass button once from remote contol, then press the volume +/-
button continously to adjust the bass output level; same mothed for the treble adjustment.
13. Speaker LED lighting adjustment: in playing mode, short press the LED lighting button continously to switch the LED
light color( total: 7 colors and off mode).
CD playback operation
This product includes CD playback function which can play with CD disc under CD/CD-R-RW/MP3 audio format (DVD not
included). Before start the CD playback, please check if there have any dirty dot or scratch on the CD disc, otherwise the CD may
cannot read out or create noise sound.
1. Press the source button repeatedly to enter the CD mode.
2. Press the eject button open the CD door, and load the CD disc into the CD tray; press the eject button again to close the CD
door. The unit will start to read and play the CD automatically.
3. Create your own playlist ( max programmed 20 track for CD and up to 99 tracks for MP3 disc)
a. In CD playback mode, press the stop button first, then press program button to start the program operation.
b. The display will show “ PR__”, press the previous/next or 10+/- button to select the track that you want to be programmed,
and press the program button again to confirm.
c. Then the display will show the programmed track and skip to next program track setting. For example, “009 PR 06” means the
number 9 track was programmed as the number 06 track.
d. Repeat the above step b and C to set up reset track till the display show “ FULL”.
e. Then press the play button to start the programmed playlist playing.
f. To cancel and remove the programmed playlist, press the stop button twice, or eject the CD disc.
4. You can also achieve the play and pause, stop, mute, repeat and random, track selection, EQ, fast-forward and fast-rewind
function etc. during CD playback. Please reference the general operation part on this manual.
7
To Next Page
Loading...
Need help?
General
