5
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
3 Adjusting the volume
Turn the knob to adjust the volume.
The selected value is shown on the
display. When switched on, the unit
plays at the preselected volume (ON
VOL).
ON VOL can be changed (refer to
“Programming with DSC – ON VOL”).
4 Softkeys/display
Softkey = key with variable function.
The functions shown in the display can
be selected.
Radio mode
In radio mode, use TU to toggle be-
tween menu level 1 and menu level 2.
The system automatically returns to
menu level 1 when no key has been
pressed for eight seconds.
Menu level 1
Station keys and memory levels
NEXT - FM
Switch between the memory levels
FM I, FM II, FM T.
NEXT - AM, AMT
Switch between the AM and AMT fre-
quency bands.
ST1 - ST6
ST1- ST6 can be used on this menu
level to store radio stations on the FM
levels I, II and “T”.
You can store six stations each on the
AM and AMT bands.
Store station – press one of the sta-
tion buttons ST1- ST6 until the station
can be heard again (beep).
Call up station – select the frequency
band. On FM, select the memory level
using NEXT and press the appropriate
station key briefly.
Menu level 2
Adjusting radio functions
NEXT - FM
Switch between the memory levels
FM I, FM II, FM T.
NEXT - AM, AMT
Switch between the AM and AMT fre-
quency bands.
BND
Select the frequency band and memo-
ry level (FM I, FM II, FM T, AM, AMT).
SCA - Scan
a) PTY is deactivated (logo is lit nor-
mally, not in reverse video)
Press SCA (Radio Scan) briefly –
“SCAN” appears in the display alter-
nately with the code of the sampled
station. All stations on the frequency
band which can be received are sam-
pled briefly.
Condensed instructions
To Next Page
Loading...
Need help?
General
