Operating Instructions
11
Snooze function
The alarm will stop sounding and will sound again after a 9 minutes period.
AUX connection
The radio has an auxiliary input. This can be used to connect an external source such
as MP3 players and other audio sources by using the included 3.5mm cable.
1. Press the MODE button to select the AUX mode.
2. Connect the 3.5mm cable to your radio and to your extenal device.
3. Press the VOL- and VOL+ buttons to adjust volume level.
Brightness function
Press the SNOOZE button to cycle through the 3 light setting.
Press & hold “Alarm key” for 3 second then will go into sleep setting,
press << or >> to set up the time at 15 mins, 30mins, 45mins, 60 mins, 90 mins or
OFF then enter.
Sleep function
To Next Page
Loading...
