33
Pasadena DJ (RP)
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
RM (Radio Monitor)
With RM-ON, the unit will
automatically switch to the
tuner whenever the casset-
te is fast winding.
RM-OFF - The function is
switched off.
To quit the DSC programming mode and
store the adjustment:
• Press DSC.
If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.
Overview of the DSC factory
settings
LOCAL : 1
DIS : 1
TIME : OFF
TA VOL : 4
BEEP : 3
LED (Code) : 1
LOUD : 4
RM : OFF
DIS (dx)
To adjust the seek tuning
sensitivity for distant recep-
tion.
DIS. 1- high sensitivity
DIS. 3- low sensitivity
TIME ON/OFF To select the display mode
during CD changer opera-
tion.
TIME ON - display of title
and playback time.
TIME OFF - display of CD
and title number.
If SCAN or MIX is active,
the system will always
switch to the TIME OFF
mode.
TA VOL To adjust the traffic an-
nouncement volume from
between 1 to 9. The mes-
sage will then come
through at this volume.
(1 = low)
BEEP Confirmation tone for all
functions which require a
button to be pressed for
more than 2 seconds.
The volume can be adju-
sted from between 0 to 9.
(0 = off)
Each alteration of this va-
lue is confirmed by a beep
tone of the corresponding
volume.
LED (code) You can adjust the LED C
to flash for extra anti-theft
protection.
LED 1 - LED always flash-
es when the unit
has been swit-
ched off via the
ignition.
LED 0 - No flashing.
LOUD Loudness - When listening
at a low level, the Loud-
ness function creates a
more natural sound by
boosting the low frequency
range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
To Next Page
Loading...
