Notes:
a. The best working distance of remote control is within 5 meters without any obstacle in between. Please aim to the remote
control sensor locates on the front of unit during operation.
b. The sensitivity of remote control will become weak when the battery power exhausted. Please replace it with fresh one for
operation.
c. Please take out the battery in case of none-operation in a long time.
d. Please dispose the battery in an environment friendly way. Please reference the local government requirement for the detail.
General operation
1. Power on/off: : long press(2seconds) power button on top panel to power on/off the unit. Short press the power button on
top panel or by remote controller to standby on or off the unit. We suggest to power off the unit completely if no operation for a
long term.
2. Play source selection: Press the mode button on the top panel, or mode button from remote controller can switch the play
source between FM/Bluetooth/Line in/USB/microSD.
3. Volume adjustment: Turn the main volume knob on the top panel, or press VOL+/- button from remote control can increase
or decrease the output volume level.
4. Treble & bass adjustment: short press the menu button on top panel first, rotate the volume knob to adjust the treble level,
and the relevant digit will show on display. Meanwhile, the output sound will change simultaneously. Press the button again
skip to bass adjustment. There can achieve same function by press the treble +/- and bass +/- button from remote controller.
5. Sound silence: press the MUTE from top panel or remote control can make the sound in silence; press it again to resume the
sound output.
6. Preset EQ: press the EQ button repeatedly from remote controller can switch the preset equalizer between
FLAT/POP/ROCK/JAZZ/CLASSIC.
7. Play/pause: press the button to pause the music, and press it again to resume the playback in Bluetooth/USB/microSD
mode.
8. Repeat & Random: press the repeat button to switch the music playback in repeat one/repeat all/random mode
9. Disco light: press the light button repeatedly can switch the disco light between 6 types effect, and turn off light.
10. Digits and +10 button: press the digit button to select the track in USB/microSD mode; or switch preset station in FM
mode. Press +10 button for track fast selection.
11. Previous/next: short press it to switch the previous or next track in Bluetooth/USB/microSD mode.
12. Menu button operation: this is a multiple function button, press it repeatedly to switch setting for
Treble/bass/microphone volume/echo/microphone treble/microphone bass/guitar volume; then rotate the volume knob
immediately can adjust the relevant level; Wait for a while can quit the setting. (Display information: TE= main output treble,
BS= main output bass, CU=microphone volume, EC= echo, T= microphone treble, B=microphone bass, GE= guitar)
FM radio operation
Before start the FM radio listening, please try to move the unit next to the window or other location in order to better FM signal.
The unit built-in an internal antenna for FM reception.
1. Auto scan and preset radio station (All-in-one): short press the play/pause button on top panel or remote controller to
auto scan and save the available radio station. The unit will auto play the first preset station after finished scanning. ( max
supported preset station:40)
2. Preset station picking up: in radio mode, press the next/previous button on top panel or remote control to pick up and play
the last and next preset station. You also can fast pick up the preset station by key-in the number via digits button from remote
controller.
3. Manual tune: press and hold the previous/next button 2 seconds to scan the available station in upward or downward
frequency, and auto play the station; key-in the radio station's frequency number by digits button from remote controller and
wait for a while, and the unit will skip and play the relevant station directly.
USB/microSD playback operation
The product includes USB/microSD playback function which can decode and playback the music from a USB/microSD storage
device. Before start the operation, please copy the MP3/WMA format music into the device; and insert the device into the unit
first, because the USB/miscroSD mode is only available when the device plugged on unit successfully. Then the unit will detect
and play the inside MP3/WMA music automatically.
Track selection: short press the next/previous button to select next and previous track; press and hold the button for fast-
forwarding and rewinding the playing music, and resume to normal playback after release the button.
In USB/microSD mode, you can achieve the play/pause, mute, repeat, EQ, treble/bass, +10 function etc. Please reference the
operation from the general operation part on this manual.
Notes:
a. Connect the USB stick by a USB extension cable for playback is not recommended which may produce noise or intermittent
sound due to audio data loss during transfer.
b. Decode and playback all MP3/WMA/WAV/FLAC format music is not guaranteed.
c. The max supported storage device is up to 32GB.
d. Some different device and brand may take a little long time to playback; please kindly note this is not mal-function.
Bluetooth operation
This product includes Bluetooth function which can wireless playback the music from other Bluetooth device (like smart
phone, tablet etc).
1. Press the mode button repeatedly to enter Bluetooth mode, and the Bluetooth symbol will flare on display which means the
unit is ready to pair.
6
To Next Page
Loading...
