EasyManua.ls Logo

Blaupunkt Philadelphia 835 - Getting Started and Setup; Scope of Delivery Contents; Initial Device Placement; Theft Protection and Power

Blaupunkt Philadelphia 835
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Scope of delivery
The scope of delivery includes:
Philadelphia 835
Remote control (incl. battery)
TMC Tuner (not for 1 011 203 911)
MicroSD card with navigation data in the MicroSD
card slot (only for devices with navigation)
GPS antenna
External Bluetooth microphone
Getting started
Small parts set
Installation material
Connecting cable
Placing the device in operation
Caution!
Transport securing screws
Ensure that the transport securing screws at the top side
of the device are removed before the startup of the de-
vice.
Note:
The Philadelphia 835 features an integrated CAN
interface that allows it to be integrated into the in-
ternal vehicle data communication for selected ve-
hicles. This integration automatically switches the
display of the Philadelphia 835 (if the equipment
features in the vehicle are prepared for it) to parking
mode when parking. When operating the air-condi-
tioning system, the settings are shown on the display
of the Philadelphia 835. The audio/video sources can
be operated conveniently and safely from the steer-
ing wheel-mounted controls.
Theft protection
This car sound system is protected against theft with a
four-digit code number (code number is factory-set to
0000).
If the code query is activated, the code number must
be entered after every interruption of the power supply
from the vehicle battery.
Note:
In the General submenu of the settings menu, you
can activate/deactivate the code query and change
the code number.
Entering the code number after a voltage
interruption
If the code number is required, a keypad for entering the
code number is displayed.
Enter the code number via the keypad.
Press the button to con rm the entry.
The device is switched on.
Note:
If you entered an incorrect code number, the display
brie y shows Security code incorrect!. Afterwards,
you can repeat the code entry.
Switching on/o
Switching on/o with the rotary/pushbutton
For switch-on, press the left rotary/pushbutton
5
.
For switch-o , hold the left rotary/pushbutton
5
pressed for more than 2 seconds.
Switching on/o via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched o with the left rotary/push-
button
5
, it is switched on or o with the ignition.
Scope of delivery | Startup

Table of Contents

Other manuals for Blaupunkt Philadelphia 835

Related product manuals