•
•
•
•
•
Select EQ or press 4 to change equalizer setting.
Manually change the EQ setting by moving the EQ
bars or select for preset EQ mode as below
Flat / Pop / Classic / Rock / Jazz / Techno /
Optimal / User
Select to return to Setup.
Press Stereo to tune into STEREO mode to receive
FM signals. Switching to MONO helps to reduce
noise when signal is poor.
Press Loud to activate or deactivate the function.
Press Local to switch between LOCAL or
DISTANCE. The unit will reduce the receiving
sensitivity when searching in LOCAL mode.
Therefore, only strong signal stations will be
received. DISTANCE mode will allow device to
receive weak signal stations.
Press RDS to activate Radio Data System for
standard communication protocal that allows
trac reports to be received and provides other
facilities, including the radio station’s name to be
seen on the radio’s display.
Note : Press 10 to change TA, AF, EON, CT at
Radio option.
t
To Next Page
Loading...
