Blaupunkt PORTO CD34 7 644 176 310 - Configuring the Level Display; External Audio Sources

48
EXTERNAL AUDIO SOURCES
Configuring the level
display
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst you
are adjusting them.
When you are not changing any set-
tings, the level display depicts the sound
system’s output level. You can switch
the level display on/off.
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the or button 7 re-
peatedly until “PEAK LVL” appears
in the display.
➮ Press the or button 7 to
switch between “PEAK ON” and
“PEAK OFF”.
When you have finished making your
changes,
➮ press the MENU button 8 twice.
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. Audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
The AUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Switching the AUX input on/off
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the or button 7 re-
peatedly until “AUX OFF” or “AUX
ON” appears in the display.
➮ Press the or button 7 to
switch AUX on/off.
When you have finished making your
changes,
➮ press the MENU button 8.
Note:
● If the AUX input is switched on, you
can select it by pressing the SRC
button 6.
LEVEL DISPLAY