35
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region (only for FM). The stations are
stored in the FMT memory bank.
Note:
● Stations that were previously
stored in this memory bank are de-
leted in the process.
➮ Hold down the BND•TS button ?
for longer than two seconds.
The station storing procedure begins.
“T-STORE” appears in the display. Af-
ter the process is completed, the sta-
tion stored in FMT memory location 1
will be played.
Listening to stored stations
➮ Select the memory bank or the
waveband.
➮ Press the station button 1 - 6 = of
the station you want to listen to.
Scanning receivable stations
(SCAN)
You can briefly play all the receivable
stations. You can set the scanning time
to between 5 and 30 seconds in the
menu.
Starting SCAN
➮ Hold down the MENU button : for
longer than two seconds.
Scanning begins. “SCAN” briefly ap-
pears in the display followed by a flash-
ing display of the current station name
or frequency.
Stopping SCAN and continuing
listening to a station
➮ Briefly press the MENU button :.
Scanning is stopped and the station that
was tuned into last will remain active.
Setting the scantime
➮ Press the MENU button :.
➮ Keep pressing the or button
8 until “SCANTIME” appears in
the display.
➮ Set the required scantime using
the
and buttons 8.
When you have finished making your
changes,
➮ press the MENU button : twice.
Note:
● The set scantime also applies to
scanning in CD changer mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting. Your radio can receive
and display this information.
For example, the programme types can
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
RADIO MODE
To Next Page
Loading...
Need help?
General
