Need help?Do you have a question about the Blaupunkt SA 2700 and is the answer not in the manual?
General| Alarm current | 1000 mA |
|---|---|
| Autonomy mode | Yes |
| Input voltage | 9 V |
| Battery voltage | 4.8 V |
| Battery capacity | 600 mAh |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Wi-Fi | - |
| Alarm decibels | 96 dB |
| Operating frequency | 868.35 MHz |
| Maximum outdoor range | 300 m |
| Operating temperature (T-T) | -10 - 40 °C |
| Number of telephone numbers supported (max) | 6 |
| Number of simultaneously connected devices (max) | 30 |
| Motion sensor technology | Passive infrared (PIR) sensor |
| Number of door/window sensors | 1 pc(s) |
| Control type | Buttons |
| Display type | LCD |
| Product color | White |
Guides through initial setup including SIM card insertion, date/time, and PIN code configuration.
Provides detailed steps and diagrams for mounting the Control Panel, including tamper switch engagement.
Explains how to mount the PIR sensor on walls or corners using knockouts and screws.
Details mounting the Door Contact and magnet, and confirms system status after device installation.
Guides on entering the User Menu via PIN and using features like Fault Display and System Log.
Details accessing Programming Mode via Master Code and lists key categories like Tel. Setting and Gen. Setting.
Covers setting phone numbers, report types (Voice/SMS), recording messages, and testing communication.
Configures PIN codes, Master Code, Entry/Exit times, and device attributes.
To Next Page
