59
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
ANGLE Use this setting to alter the
viewing angle to your liking
from -1 to 0 to +1.
BRIGHT You can adjust the display
brightness from between 1
to 16. You can also select
different values for day and
night.
Selecting the night bright-
ness:
Switch on the vehicle lights
and programme the bright-
ness value. The car radio’s
lighting connector must be
hooked up to the vehicle’s
electric system for this to
function properly.
COLOUR
(Variocolour)
For gradually matching the
radio illumination with the
dashboard lighting.
green ..............light orange................. red
LED ON Here you can choose be-
tween LED ON or LED OFF.
With LED ON, the KeyCard
tongue will flash for extra
anti-theft protection when
the unit has been switched
off and the KeyCard re-
moved.
LEARN KC To “train” a second
KeyCard.
Please read the information
in chapter “KeyCard theft
protection system - “Train-
ing” a second KeyCard”.
READ KC To read out the KeyCard
data.
The card supplied with the
radio is used to display the
model name, type number
(7 6..) and the serial
number.
With the extra card it is pos-
sible to display the Short
Additional Memory (S.A.M.)
data entered by your spe-
cialised dealer. See chapter
“Short Additional Memory
S.A.M.”.
If you remove the KeyCard
during the reading process,
“READ KC” will show on the
display panel.
PTY LANG To select the programme
type language:
DEUTSCH or ENGLISH
SCANTIME Use this function to set the
scan time for the radio or
CD player from between five
and 30 seconds.
S-DX To adjust the seek tuning
sensitivity for distant recep-
tion.
DX 1 - high sensitivity
DX 3 - low sensitivity
S-LO To adjust the seek tuning
sensitivity for local recep-
tion.
LO 1 - high sensitivity
LO 3 - low sensitivity
The seek tuning sensitivity
values can be separately set
for AM and FM.
San Francisco gb® 29.05.2002, 12:16 Uhr59
To Next Page
Loading...
