Need help?Do you have a question about the Blaupunkt Santa Monica C50 and is the answer not in the manual?
Essential information before using the car audio system, including safety and setup.
Explains the theft protection system and how to remove/replace the front panel.
Details various methods for turning the car audio system on and off.
Covers adjusting volume, power-on volume, mute, and phone/navigation audio levels.
Overview of RDS radio receiver features like station name and PTY.
How to select the radio source from other inputs.
Explains AF for frequency switching and REG for regional programming.
Navigating FM, MW, LW wavebands and memory banks.
Methods for finding radio stations including seek and manual tuning.
Adjusting sensitivity for seeking stations based on signal strength.
Manual and automatic methods for saving favorite stations.
Scanning all stations in reception range and adjusting scan time.
Selecting stations by program type and managing PTY settings.
Using HICUT for treble cut and SHARX for bandwidth switching.
How to fix or vary the display of RDS texts like station names.
Activating or deactivating the priority for traffic announcements.
Setting the volume level for traffic announcements.
How to activate or deactivate the Traffic Information Memory function.
Accessing and listening to recorded traffic messages.
Adjusting how long TIM remains active after system shutdown.
Instructions for inserting a cassette and initiating playback.
How to remove a cassette tape from the unit.
Switching between Side A and Side B of a cassette.
Fast forwarding or rewinding to select specific tracks.
Setting the current track to repeat playback.
Scanning cassette tracks to find desired ones.
Changing information displayed during tape playback.
Procedures for fast forwarding and rewinding tapes.
How to pause and resume cassette playback.
Automatically skipping silent or blank portions of tape.
Setting equalization for metal or CrO2 tapes.
Activating Dolby B noise reduction for compatible cassettes.
Switching the audio source to the CD changer.
Choosing different CDs from the changer magazine.
Selecting specific tracks on the current CD.
Quickly previewing tracks on a CD.
Setting tracks or entire CDs to repeat.
Playing tracks randomly from a CD or all CDs.
Scanning all tracks across all CDs in the changer.
Pausing and resuming CD playback.
Assigning custom names to CDs for easier identification.
Detailed steps for naming or editing CD titles.
How to briefly view the current time.
Setting the clock automatically via RDS or manually.
Choosing between 12-hour and 24-hour time formats.
Enabling the clock display even when the system is off.
General guide to adjusting bass, treble, balance, and fader.
Specific steps to modify the bass level.
Specific steps to modify the treble level.
Specific steps to adjust the left/right speaker balance.
Specific steps to adjust the front/rear speaker balance.
Activating or deactivating the Loudness feature.
Setting the intensity level for the Loudness boost.
Introduction to the parametric digital equalizer and its filters.
Recommendations for optimal equalizer setup.
How to activate or deactivate the equalizer.
Detailed steps for adjusting equalizer filters and levels.
Guidance for setting equalizer parameters based on sound.
Using the spectrometer display to visualize audio adjustments.
Choosing the type of spectrometer display.
Connecting external devices like portable players.
Activating or deactivating the AUX input.
Explains TMC for traffic messages and navigation system connection.
Technical details for amplifier output power.
Technical details for tuner wavebands and frequency response.
Technical details for tape deck frequency response.
Technical details for preamp output channels and voltage.
General| Display Type | TFT |
|---|---|
| Bluetooth | Yes |
| AUX Input | Yes |
| Radio Data System (RDS) | Yes |
| Steering Wheel Control | Yes |
| Power Output | 4 x 50 Watts |
| Radio Tuner | FM, AM |
| Equalizer | Yes |
| Compatibility | Android, iOS |
To Next Page