Blaupunkt SANJOSE120 - Page 11

4.
Touch to turn off the screen. When the screen turned off, touch any portion of the screen to
turn on the screen again.
5.
Hold
&
slide
to
show
the
hidden
operatio
icons.
6.
Touch
to
shift to SYSTEM SETUP
MENU for various setting.
7.
Touch
to
shift
to
DISC
SETUP
MENU
for
various
setting.
8.
Touch
to
shift
to
CALENDAR
SETUP
MENU for various setting.
9.
Touch
to
shift
to
AUDIO SETUP
MENU for various setting.
10.
Touch
to
shift
to
VISUAL SETUP
MENU for various setting.
11.
Touch
to
shift to
SCREEN SETUP
MENU for various setting.
12.
Touch
to
shift to
ILLUMINATION SETUP MENU for various setting.
13.
Touch
to
shift
to
SW SETUP
MENU for various setting.
14.
Touch
to
shift
to
VERSION
MENU for various setting.
15. Touch repeatedly to
select
the
default
on
screen
language.
16
. Touch
to
turn on or off of
allowing
watching video during driving (when the
brake-
brown wire
has not been connected).
17.
Touch to turn
on
or off of beep sound when touching
on
screen for control.
18. Touch
to
turn
on
or off of front camera input (when front camera and the pink/black wire
connected):
....
when the front camera input
is
turn
on
and the car
is
shifted from backward mode
to
forward mode, front camera input
will
be
display
for 1 0 seconds
....
the
default
setting after first
installation
is off and at this moment, no front camera input
will
be display
when the car is shifted from backward mode to forward mode
19. Touch
repeatedly to select "Audio Language"; "Subtitle
Language"
&
"Menu
Language"
Language" for DVD
playback
provided the DVD recorded with relative
languages.
Note: During DVD
playback
mode, new setting cannot be activated.
It is recommended
to set before inserting a DVD for
playback
20.
Touch to activate
SCREEN RATIO MENU to
select
aspect ratio of screen for viewing.
21. Touch
repeatedly to set for year
I
month
I
day
I
hour
I
minute
I
12/24 hour format.
22. Touch repeatedly to set for output
level
on
volume
I
treble
(TRE)
I
bass (BAS)
I fader (FAD)
I
balance
(BAL).
23. Touch repeatedly to set for brightness
I
contrast
I
hue
I saturation of screen.
24. Touch to reset and brightness
I
contrast
I
hue
I
saturation will
return to its default
stage.
25. Touch repeatedly
to set for the dimmer (brightness) of screen.
26. Touch
to
activate SCREEN CALIBRATION
MENU
on
screen.
Follow
the r
+
J
mark appeared,
touch
to
complete the
calibration.
!I
27. Touch
to
select
the desired illumination backlight colour.
At
AUTO
mode,
colour
of
backlight will
change automatically (cycle
change).
At
USER
mode,
colour
of
backlight
can be set by user.
28. Touch to
select the function for setting (when the steering
wheel control
wires
-grey
&
green
as
well
as the ground wire connected).
29. Touch
to
reset.
30. Touch repeatedly to
select
the radio frequency that suit the country/region
located.
31. These show the version of the unit and not available
for setting.
[
10]