Blaupunkt Skagen 370 DAB BT - Page 31

DURBAN224 DAB BT 22.05.19 17:00
15 15
Bluetooth
Press the desired memory button 1-5 > for
approx. 2 seconds to store only the number.
Press the rotary control for approx.2sec-
onds to enter a name for the entry.
You can now enteraname with up to 15 char-
acters:
Turn the rotary control to select a character
for the respective position.
Press the rotary control to go to the next
position.
Note:
To return to the previous position in the entry
menu, turn the rotary control until the "<<<"
option is selected, and press the rotary con-
trol.
Press the desired memory button
1-5 > for approx.2seconds to store the
number and name.
The dislay briey shows "NUMBER SAVED".
Afterwards, you are returned to the Blue-
tooth® menu and the "DIAL NEW NUMBER"
menu item.
Notes:
• A number previously stored on the memo-
ry button is replaced.
• Ifatelephone is unpaired, the numbers
stored for this telephone are automatically
deleted.
Speed dial for any phone number or for the
number dialed last or a stored number
With spped dial, you can make a call without
having to select the corresponding function in the
Bluetooth® menu.
To call the number dialed last,
press the button .
The display shows the number dialed last.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
Press the button to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
To call a stored number,
press the button .
Pressamemory button 1 - 5 > to call the
number stored.
Note:
If no number is stored under the selected
memory button, the display briey shows
"NO NUMBER".
Press the button to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
To call any number,
press the button .
Press the rotary control to open the entry
menu and enter a number (enter the phone
number as described in the section "Making
a call").
Press the button to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
Speed dial for phone book entries
Note:
This function is only available
• if the phone book of the connected cell
phone was transferred to the car sound
system (see the chapter "Phone book func-
tions").
• if the speed dial is set for phone book en-
tries (see the chapter "Additional functions
in the Bluetooth® menu", section "Setting
the button function for speed dial").
To select an entry of the phone book with the
speed dial and call it,
press the button for approx. 2 seconds.
The display shows the rst phone book entry
or the search function for phone book entries.
If necessary, select another entry as described
in the section "Calling an entry in the phone
book".
Press the button to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.