OPERATION
12
E
N
G
L
I
S
H
USB PLAY OPERATION
When you connect a USB media, the unit
will search the MP3/ WMA files and start to
play them. In any other mode, you can also
press the SRC button to select USB mode.
When playing the MP3/WMA files in the
device, the operation is the same as the
MP3/WMA operation described above.
Note
：
The main unit can only support the
standard USB memory disc approved
by Microsoft.
USB MP3 player is not a standard
which means different models have
their own standard. Therefore, not
every MP3 player is supported.
When connecting an MP3 player which
has a regular battery (non rechargeable
battery), you should remove the battery
from the MP3 player first, then connect
it to the USB interface. Otherwise, it
may cause the battery to burst.
SD OPERATION
When you insert an SD card in the SD
interface, the unit searches the MP3/WMA
files on the card and starts to play them.
The operation is the same as the
MP3/WMA operation described above.
In any other mode, you can also press the
SRC (1) button to select SD mode.
SUPPORTED MP3/WMA DECODING
MODES
The main unit supports MP3/WMA
decoding modes as shown below.
Standard
Bit Rate
(kbps)
MPEG1 Audio
Layer 3 (44.1
kHz)
32,48,64,96,
128,192,256,
320
Windows
Media Audio
(44.1 kHz)
64,96,128,192
The USB solution can support:
1. Number of folders: 500 max.
2. Number of files: 999 max.
3. Depth of folder: 8 layers
4. Size up to: 16 GB
To Next Page
Loading...
