39
INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER SETUP APPENDIX
✔ You will hear a confirmation beep when the destination has been stored.
The navigation display will then appear again.
Storing your current position as a destination
You have the option of storing your vehicle’s current position as a destination in
the destination memory. This feature is useful if you spot an interesting location
during your journey and want to return to it some other time.
Note: To ensure that your vehicle position can be stored as a posi-
tion, a navigation CD must be inserted in the drive.
To store your current position as a destination,
1 press the NAV button 1.
2 Select the memory bank in which you want to store the position. To do so,
press the NAV button 1 repeatedly until the memory bank (N1, N2, N3 or
N4) that you want appears in the display.
3 Press the
button <.
✔ The current position is displayed.
4 Whilst the position is being displayed, press and hold down one of the
1 - 6 buttons > for longer than 2 seconds to assign the position to that
button.
✔ The position is entered into the destination memory.
B243, SCHÜ
TZENWIESE
N1 POSI=ION
NAV
T
MC
2 BA TP E gb 12.04.2005, 14:14 Uhr39
To Next Page
Loading...
