Need help?Do you have a question about the Blaupunkt TravelPilot Rome NAV55E and is the answer not in the manual?
General| Brand | Blaupunkt |
|---|---|
| Model | TravelPilot Rome NAV55E |
| Category | Car Receiver |
| Language | English |
Information on the intended use of the device and its limitations for off-road navigation.
Warnings and requirements for self-installation of the device.
General safety advice for device operation, cleaning, and disposal.
Detailed description of each button and function on the device.
Explanation of symbols and indicators on the device display.
How the device prevents theft using code numbers and detachable panels.
Instructions for removing and reattaching the detachable control panel.
Step-by-step guide to powering the device on and off.
Procedure for entering the security code after power loss.
Instructions for inserting navigation, audio, or MP3 CDs into the device.
How to control the audio volume of the device.
Method to temporarily silence the audio output.
How the device interacts with a connected car phone.
Explanation of how to use menu buttons for navigation and selection.
A practical example demonstrating menu navigation and item selection.
How to leave the settings menu and return to previous levels.
Summary of available settings menus and their functions.
How to adjust the overall sound and left-right balance.
Guide to modifying bass and treble frequencies for sound preference.
Adjusting loudness, balance (left/right), and fader (front/rear).
How to use the 5-band equalizer to fine-tune sound frequencies.
Settings for volume control, display, language, code query, and time.
How to adjust volume settings like maximum switch-on volume.
Settings for switch-on volume, auto-low volume, TA/phone volume, and speed-dependent volume.
Settings for display brightness and language selection.
Configuration of code query for theft protection and clock settings.
Basic radio settings including station name display and RDS functions.
Settings for AF, regional programs, and improved reception (HighCut).
How to adjust station seek tuning sensitivity for reception quality.
Settings for voice output, junction zoom, time display, and TMC announcements.
Adjusting time display and TMC announcement voice output.
How to enable or disable the junction zoom feature.
How to choose between radio, CD, MP3, or CD changer.
Steps to select the radio as the active audio source.
Explanation of the radio display elements and symbols.
Steps to select the CD/MP3 player or optional CD changer.
Explanation of the MP3 playback display elements.
Explanation of the CD changer playback display elements.
How music playback works, including button functions and playback modes.
Table detailing operations for CD, MP3, CD changer, and radio.
Explanations of MIX and Repeat modes, and track/folder functions.
How the device handles and integrates traffic announcements (TA).
How to enable or disable traffic announcement priority.
How to enable or disable automatic tuning to TMC stations.
How to stop a current traffic announcement.
Ensures the navigation system receives TMC data for dynamic guidance.
How to display and scroll through TMC messages.
Overview of the radio's main menu options (Tune, Band, Options).
How to choose radio wavebands (FM, MW, LW) and memory banks.
How to manually or automatically tune into radio stations.
How to perform an automatic station seek tuning.
How to stop the automatic station search.
How to manually tune to a specific radio frequency.
How to scan and play stations for a short duration.
How to stop SCAN and return to the previously played station.
How to manually and automatically store radio stations.
Step-by-step guide to saving stations to memory banks.
How the device automatically stores the strongest FM stations.
How to prematurely stop the automatic station storing process.
How to play previously stored radio stations.
Requirements for MP3 CDs to be playable by the device.
Requirements for WMA files to be playable by the device.
How CD playback starts and its advantages.
How to select specific tracks from a list for playback.
Steps to select tracks from a list on the built-in CD player.
Steps to select tracks from a list on an optional CD changer.
How to select MP3 tracks from a list, including browsing folders.
How to scan and play tracks for a short duration.
Settings for displaying ID3 tags and scrolling text for MP3 playback.
How to toggle between MP3 file names and ID3 tag information.
How to enable or disable scrolling text for MP3 playback.
How to display complete MP3 information text.
How the navigation system determines position and calculates routes.
How to input a destination into the navigation system.
How the system determines the vehicle's current position.
How turn-by-turn directions (visual and voice) are provided.
How the system loads map data for nearby areas without the CD.
Instructions for installing the navigation software from the CD.
Description of the main navigation screen elements and symbols.
Overview of the main navigation menus (Destination, Memory, Options).
How to enter a new destination or recall a stored one.
How to input characters using the on-screen keyboard.
How to save entered destinations for future use.
Steps to initiate the navigation system.
Entering new destinations vs. recalled ones, and text input.
Selecting characters for text input, including auto-completion.
Further details on character input, auto-completion, and switching to lists.
How to input special characters like umlauts or accents.
How to delete incorrectly entered characters during text input.
Step-by-step guide to entering a full address for navigation.
How to select the destination country.
How to enter the destination city by name or postcode.
How to enter the street name for the destination.
How to enter a city center or a specific area within a city.
How to find and navigate to points of interest (hotels, stations, etc.).
How to enter the house number for a street address.
How to enter an intersection as a destination.
How to select points of interest from different areas.
How to save entered destinations for future use.
Details on the three destination memory types (Last 10, Destinations, Waypoints).
How to edit saved destinations by deleting or renaming them.
How to retrieve and start navigation to a saved destination.
How the system provides turn-by-turn directions after a destination is set.
How the system calculates the route and displays options.
Explanation of visual and voice-prompted turn-by-turn directions.
Details on how visual turn-by-turn directions are displayed.
How voice prompts guide the driver, including road names.
Conditions under which the wind rose is shown instead of directions.
How the system recalculates routes if you deviate from the planned path.
How to switch audio sources while navigation is active.
How to stop the active navigation guidance.
How to view the complete calculated route and its segments.
How to manually change parts of the route, e.g., to avoid traffic.
How to adjust route preferences like type, roads, and routing strategy.
How to select route preferences (Optimum, Fast, Short, Dynamic).
How to allow or disallow certain road types (motorways, ferries, tolls).
How to balance time vs. distance for the optimum route.
How to enable/disable dynamic route adaptation based on TMC traffic announcements.
How the system recalculates routes based on TMC traffic information.
How to check the vehicle's current location and GPS status.
How to view the active destination during guidance.
Safety warnings and requirements for installing the device.
Preparatory steps before installing the device.
Overview of the device's connection ports and pin assignments.
Detailed wiring diagram and descriptions for Chamber A connectors.
How to establish the power connection for the device.
How to connect the vehicle's loudspeakers to the device.
How to connect the vehicle's radio antenna.
How to connect the GPS antenna.
How to connect the reversing light signal for parking assistance.
How to connect the vehicle's speedometer signal for navigation.
Instructions for physically installing the device into the vehicle.
How to install the mounting bracket for the device.
Steps for inserting the device into the installed bracket.
Procedure for entering the initial code after installation.
How to enable or disable the speedometer signal analysis.
How to check connections for GPS, direction, ignition, and speed signal.
Initial calibration required for the navigation system to function correctly.
How to calibrate the system using a longer drive.
How to calibrate the system using a precisely measured distance.
How to cancel an ongoing calibration process.
Instructions for cleaning the device.
Steps for safely removing the device from the vehicle.
To Next Page