Blaupunkt TravelPilot Rome NAV55E - Operating the radio; Cancelling Automatic Station Tuning; Manual Station Setting

37
To defi ne the direction of the station
seek tuning:
Turn the menu button until one of
the arrows D is highlighted.
Press the OK button 3.
The radio searches for the next
station in the current frequency
band in the selected direction.
The setting in the "Sensitivity"
menu (see p. 24) is taken into
account.
As soon as a station is located, the
seek tuning stops and the located
station is played. The station name
appears on the display after a few
seconds if the station broadcasts
RDS information and you activated
the display of station names (see
p. 22).
You can now store this station (see
p. 39) or restart the automatic sta-
tion seek tuning.
Note:
If you hold the OK button 3
pressed, the automatic seek tun-
ing skips any stations it locates
until you release the OK but-
ton 3 again.
➜
➜
Cancelling an automatic station
seek tuning
To cancel the automatic station
seek tuning:
Press the ESC button A.
The automatic station seek tun-
ing stops. The previously played
station is played.
Setting stations manually
To set a station manually:
In the radio display, select the
"Tune" menu.
The tuning menu with frequency
band A, station name B and fre-
quency C is displayed.
Turn the menu button until the
frequency band A is highlighted
and press the OK button =.
The frequency band A is high-
lighted in red.
Turn the menu button < to the
left or the right.
You are listening to the current
reception frequency.
As soon as a station has been lo-
cated, it is played. The station name
appears on the display after a few
seconds if the station broadcasts
RDS information and you activated
➜
➜
➜
➜
BBC
I 92 I 93 I 94 I
Tune
D
BBC
I 92 I 93 I 94 I
Tune
D
BBC
I 92 I 93 I 94 I
Tune
B
A
C
BBC
I 92 I 93 I 94 I
Tune
B
A
C
Operating the radio
ROMENAV55Eman_star_ois_eng.indd 37ROMENAV55Eman_star_ois_eng.indd 37 06.12.2005 16:03:51 Uhr06.12.2005 16:03:51 Uhr