Blaupunkt TravelPilot Rome NAV55E - Basic settings before the trip; Radio Settings

22
To set the clock:
In the "System" menu, select and
confi rm the "Clock" menu item.
The clock menu appears. The
hours are highlighted.
Change the hours by turning the
menu button < and press the
OK button =.
Change the minutes by turning
the menu button < and press
the OK button =.
Setting the basic settings of
the radio
Your device features an RDS radio.
RDS means "Radio Data System".
The radio can receive data which
are transmitted without being heard
parallel to the music. This allows for
displaying the station name on the
display and automatically switching
ti an alternative frequency if your
vehicle is leaving the frequency
range of a station.
Basic settings and comfort func-
tions of the radio are defi ned in the
"Tuner" menu.
Note:
Before you can change to the
"Tuner" menu, the radio must be
set to an FM station!
➜
➜
➜
Displaying the station name
Some FM radio stations use the
RDS signal to transmit advertise-
ment or other information instead
of the station name. You can defi ne
which of this information is shown
on the display as follows:
In the settings menu, select and
confi rm the "Tuner" menu item.
The "Tuner" menu appears.
In the "Tuner" menu, select the
"RDS" menu item.
Use the OK button = to tog-
gle the RDS functions between
"VAR", "FREQ" and "FIX".
"VAR": All information is dis-
played as soon as it is received,
including advertisement.
"FREQ": Neither station name
nor advertisement is displayed,
only the reception frequency.
"FIX": Only the information re-
ceived fi rst is displayed, which
can be the station name or ad-
vertisement or any other piece
of information.
➜
➜
•
•
•
Set time
12 05
Set time
12 05
Menu
Navigation
Tuner
System
Audio
Equalizer
Installation
Menu
Navigation
Tuner
System
Audio
Equalizer
Installation
Basic settings before the trip
ROMENAV55Eman_star_ois_eng.indd 22ROMENAV55Eman_star_ois_eng.indd 22 06.12.2005 16:03:25 Uhr06.12.2005 16:03:25 Uhr