Blaupunkt TravelPilot Rome NAV55E - Operating the navigation system; Displaying the Calculated Route; Changing Route (Traffic Ahead)

67
Select and confi rm "Yes" to can-
cel the destination guidance.
The current position is shown on
the navigation display. You do not
receive any additional turn-by-
turn directions.
Displaying the calculated
route
You can display the complete calcu-
lated route as follows:
Note:
You can display the route only if
you entered a destination and
the route was calculated.
Press the
button B for ap-
prox. 2 seconds.
Or:
Mark and confi rm the "Options"
menu in the navigation display.
The Options menu of the naviga-
tion system appears.
In the "Options" menu, mark and
confi rm the "Route list" menu
item.
➜
➜
➜
➜
The route list appears. The route
segments that remain to be driven
are displayed. If a route segment
features traffi c obstructions, this
section is identifi ed by a warn-
ing triangle. In addition, voice
output concerning the route are
repeated.
You can scroll through the route list
using the menu button <. You can
display abbreviated sections of the
route list in their entirety by press-
ing the
button B.
Changing a route (Traffi c
ahead)
The route is automatically adjusted
to the current traffi c situation pro-
vided that you activated "Dynamic"
in the "Route options" menu
(see p. 70).
If you want to manually change a
part of the route, e.g. because a
section is blocked, proceed as fol-
lows:
Note:
You can change the route only
if you entered a destination and
the route was calculated. You
can block only one section of the
route, not several.
Mark and confi rm the "Options"
menu in the navigation display.
The Options menu of the naviga-
tion system appears.
➜
Navigation
No
Do you really want to
cancel route guidance?
Yes
Options
Route options
Traffic ahead
Route list
Options
Route options
Traffic ahead
Route list
Operating the navigation system
ROMENAV55Eman_star_ois_eng.indd 67ROMENAV55Eman_star_ois_eng.indd 67 06.12.2005 16:04:36 Uhr06.12.2005 16:04:36 Uhr