Blaupunkt TravelPilot Rome NAV55E - Installation instructions; Displaying Current Destination; Safety Guidelines for Installation; Pre-Installation Steps

72
Displaying the current destination
If the destination guidance is active,
you can display the current destina-
tion as follows:
Press the
button B.
The Info display appears.
In the Info display, select and
confi rm the "Destn. Info" menu.
The destination is displayed.
➜
➜
Installation
instructions
These installation instructions apply
to most types of vehicles. Your vehi-
cle may differ depending upon the
model. In this case and for any other
questions, your Blaupunkt author-
ised dealer or our telephone hotline
will gladly provide assistance.
We assume no liability for damages
resulting from installation or con-
nection errors or consequential
damages.
Note:
These installation instructions
assume that the negative pole of
the battery is connected to the
body of the vehicle.
For your safety
General
You may only install the device
yourself if you are experienced
in installing car sound systems
and navigation systems and are
very familiar with the electrical
system of the vehicle.
Operate the device only with a
battery voltage between 10.5
and 14.4 V!
Before the installation
Allow the device to become accli-
matised for several hours prior to
installation to prevent the forma-
tion of condensation inside the
housing!
•
•
•
Installation instructions
ROMENAV55Eman_star_ois_eng.indd 72ROMENAV55Eman_star_ois_eng.indd 72 06.12.2005 16:04:44 Uhr06.12.2005 16:04:44 Uhr