63
You can perform the following at
any time during destination guid-
ance:
Display the complete route (see
p. 67),
change the route, e.g. to avoid a
specifi c part of the route ("Traffi c
ahead", see p. 67),
change the route options, e.g.
to favour a fast or a short route
(see p. 68),
switch the "Dynamic" route op-
tions on/off to incorporate traffi c
obstructions (see p. 70),
cancel the destination guidance
(see p. 66).
Route calculation
When you start the destination
guidance, you hear: "Calculating
route" and the display shows the
overview of the route options for
approx. 10 seconds.
•
•
•
•
•
To change the route options now:
Mark and confi rm the "Change"
menu within 10 seconds.
The "Route options" menu ap-
pears (see p. 68).
If you do not want to change the
route options at this time:
Wait approx. 10 seconds or se-
lect and confi rm the "Continue"
menu.
After the route calculation, the
route as well as a corridor to
the left and the right side of the
route is saved in the memory of
the navigation system. The com-
pletion of the corridor data is il-
lustrated by the corridor status
display K, provided that the navi-
gation CD is in the drive.
If desired, you can remove the
navigation CD from the device as
soon as at least 2/3 of the cor-
ridor status display K is fi lled,
and play a CD.
➜
➜
10 sec.
BBC
4
5
6
7
km
2:37
137
FM1
16:13
TMC
1
2
3
SIR MATT BUSBY WAY
Navigation
No
Do you really want to
cancel route guidance?
Yes
ESC
Calculating route
Short
Dynamic
Change Continue
Destination
Route calculation
Change:
Set route options
Destination
guidance is starting
Calculating route
Short
Dynamic
Change Continue
FM1
01:13
Destn. Memory
TMC
1
2
3
4
5
6
Sir Matt Busby Way
7
Operating the navigation system
ROMENAV55Eman_star_ois_eng.indd 63ROMENAV55Eman_star_ois_eng.indd 63 06.12.2005 16:04:31 Uhr06.12.2005 16:04:31 Uhr