Blaupunkt TravelPilot Rome NAV55E - Basic settings before the trip; Audio Adjustments

16
To change the loudness:
In the "Audio" menu, select and
confirm the "Loudness" menu
item.
The loudness control is dis-
played.
Change the loudness by turning
the menu button < to the left
or right. Try out different loud-
ness settings at high and low
volume until you fi nd the desired
sound.
At low loudness, the sound ap-
pears to have less bass at a low
volume than at a high volume. A
high loudness attempts to com-
pensate for this effect.
Press the OK button = to store
this sound or press the ESC but-
ton A to return to the previous
sound setting.
Adjusting the balance
The balance controls the volume dis-
tribution between left and right.
Note:
The balance setting applies to all
sources.
➜
➜
➜
To change the balance:
In the "Audio" menu, select and
confirm the "Balance" menu
item.
The volume distribution is dis-
played.
Change the balance by turning
the menu button < to the left
or right.
The left-right volume distribution
changes. The display shows the
volume distribution.
Press the OK button = to store
this balance setting or press the
ESC button A to return to the
previous balance setting.
Adjusting the fader
The fader controls the volume dis-
tribution between front and rear.
Note:
The fader setting applies to all
sources.
To change the fader:
In the "Audio" menu, select and
confi rm the "Fader" menu item.
The volume distribution is dis-
played.
➜
➜
➜
➜
Loudn.
7
4
Loudn.
7
4
Balance
7
Balance
7
Basic settings before the trip
ROMENAV55Eman_star_ois_eng.indd 16ROMENAV55Eman_star_ois_eng.indd 16 06.12.2005 16:03:15 Uhr06.12.2005 16:03:15 Uhr