42
INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER SETUP APPENDIX
Switching audio sources
You can switch to a different audio source at any time during navigation.
1 Press the FM•AM 4 button or the CD•C button 5 during the active naviga-
tion session to switch between radio mode and CD-changer mode.
✔ The main menu of the selected audio source appears in the display. CD-
changer mode is only available if a CD changer is connected and operation-
al.
If you want to switch back to the navigation session display,
2 press the NAV button 1.
Cancelling navigation
To cancel an active navigation session,
1 press the ESC button =.
✔ A confirmation request appears.
If you are sure you want to cancel navigation,
2 press the OK button ; or
if you do not want to cancel navigation,
2 press the ESC button = again.
Note: The data for the current corridor remain in memory after you
cancel navigation. This means you can navigate to the last destina-
tion again without having to insert the navigation CD-ROM. If you
enter a new destination, the system might ask you to insert the nav-
igation CD-ROM.
T
MC
CANCEL
ROUTE
GUIDANCE?
NAVI
NAV
2 BA TP E gb 12.04.2005, 14:14 Uhr42
To Next Page
Loading...
