Blaupunkt VIO-HS20 - Blaupunkt VIO-HS20 Product Overview; Device Components and Indicator Lights; Indicator LED Status Explained

5
English
2. Product Description
1. Indicator LED
2. Nigh vision IR-LED
3. Camera Lens
4. Built-in microphone
NOTE:
This quickstart guide explains the installation and 1st time conguration of the
VIO-HS20. For any further information or the latest manuals, please visit our website:
http://security.blaupunkt-service.com
2
6
Indicator LED status: Camera status:
Red light on Camera booting up
Green light slow ashing Booting completed, waiting for WiFi
conguration
Green light quick ashing Wi smart conguration in progress, including
WPS (WiFi Protected Setup)
Green light on Wi connection succeeded, operate normally.
Red and green lights ash
alternately
Camera rmware upgrade
Red light slow ashing Network connection failure or disconnected from
the network
Red light quick ashing Device malfunction, fail to boot up or SD
card malfunction. Please go to chapter 6.3
“Troubleshooting”.
5. Reset Button
6. USB power port
7. Built-in speaker
8. Micro SD-Card slot
1
4
3
5
8
7