EasyManua.ls Logo

Blaupunkt WS10BK - 页 8

Blaupunkt WS10BK
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Indoor temperature/trend 2. Indoor humidity/trend
3. Outdoor temperature/trend 4. Outdoor humidity/trend
5. Animated weather forecast 6. Clock time
7. Signal receiving wireless symbol 8. Battery compartment cover
9. Hole for hanging
10. Adjustment buttonsset/up/down/memory
11. Battery compartment 12. Channel selector
13. Rope and hook hole 14. Sensor
15. Freezing indicator
Installation
Open the battery compartment cover. Insert 2 x AAA batteries to the
main unit, and insert 2 x AA batteries to the outdoor transmitter
according to the correct polarity showed in the compartment. (Batteries
are included)
We recommend use high quality alkaline for the best product
performance. Heavy duty or rechargeable batteries are not
recommended. The display will off in case of battery power exhausted.
(Fresh battery using life time: 6month for main unit, 12month for
outdoor wireless transmitter, reference only, not warranty)
Receive signal from outdoor wireless transmitter
The main unit can detect and receive the outdoor temperature and
humidity wireless signal from transmitter automatically after power
setting ready. There will take 3 minutes maximum for signal searching.
The signal receiving wireless symbol will flash on display during
searching, and becomes stable after get the signal. The wireless symbol
will be disappeared after 3 minutes if there is no available signal be
received. And outdoor temperature and humidity data will show “ - - “ on
display. In case you need reconnect the wireless signal, please press and
hold the up button 3 seconds.
Placement and important notes:
1. The main unit support 1 outdoor wireless transmitter only. If the
transmitter includes channel switching, please always set it as channel 1
(* The sensor might be unified for different products that are with 3
channels
2. please use and put main unit or transmitter device 1.5~2 meters away
from interference source like computer monitors or TV sets. Please also
place the main unit stand up far away with metal window frames.
3. Please do not use other electronic products such as headphones or
speakers operating at the same signal frequency (433.92MHz), which
6

Related product manuals