Need help?Do you have a question about the BLEC CP Series and is the answer not in the manual?
Explains the operational mechanism of the seeder, detailing how it sows and incorporates seeds into the soil.
Identifies and labels the various controls and levers on the seeder unit for user operation.
Provides step-by-step instructions for assembling the seeder unit to the power tiller.
Contains additional notes or reminders related to the preparation and setup process.
Describes the adjustable seeding mechanism and how it controls seed distribution.
Details the step-by-step process for calibrating the seeder's seed rate for accurate sowing.
Provides additional guidance and considerations for the calibration process.
Outlines the initial steps and procedures for starting the operation of the seeder.
Instructions for cleaning and maintaining the seed hopper after use.
Guidance on checking and maintaining the stainless steel hopper sections for damage.
Information regarding the maintenance and replacement of seed hopper brushes.
Details on maintaining the chain-driven seed hopper rotors and chain tension.
Instructions for maintaining the cast ring rollers, including wear and tightening.
Guidance on adjusting and maintaining the scraper plates for optimal performance.
Recommendations for regular greasing of pivot pins and bosses.
Notes on roll bearings, indicating they are sealed and require no maintenance.
Information regarding available accessories for the seeder unit.
Details on modifications made to the machine and availability of options.
Provides technical data including sound pressure and vibration levels.
To Next Page
General