bleep DREAMWAY User Manual

Step 1
Parts needed: DreamWay
interface, black hook & loop
lter strap, 2 white lters.
Step 2
Remove DreamWay vent swivel on
end of tube from the bottom of
the interface.
Step 3A
Apply the 2 pieces of white lter
material over the 2 cutout side
openings of the black hook
and loop lter strap. Be sure that the
“scratchy side” is facing up and on
the side you are applying the
white lter material on.
Step 3B
During the application of the completed
vent diuser strap, the soft side of the
hook and loop strap needs to be on the
outside of the DreamWay.
Step 3C
This is to make sure the soft side is
what comes in contact with the face,
as shown in the image to the left, trapping
the hook and loop side with the white
lter material against the actual plastic
vent openings on the bottom of the
DreamWay.
Step4A
Apply the hook and loop lter strap,
with both white diuser lters in place,
back onto the bottom of the vent
openings, where the tube was formerly
attached.
100607

bleep DREAMWAY Specifications

General

Product Type	Sleep Headphones
Technology	Bone conduction
Sleep Tracking	Yes
Form	Headband
Sound Technology	Bone conduction
Battery Life	10 hours
Features	Sleep Tracking
Usage	Sleep
Material	Silicone

Summary

Bleep Dreamway Vent Diffuser Application Instructions

Required Parts for DreamWay Vent Diffuser

Lists necessary components for DreamWay interface, filter strap, and white filters.

Remove Vent Swivel from DreamWay Interface

Instructions to detach the vent swivel from the interface's tube end.

Apply White Filter Material to Strap

Attaching white filter material to the hook and loop strap, ensuring scratchy side is up.

Correct Strap Placement Orientation

Guides strap placement with soft side facing outward on the DreamWay.

Ensure Soft Side Contact for Comfort

Explains soft side contact for comfort, trapping filter material against plastic vents.

Reattach Filter Strap to Vent Openings

Reattaching the strap with filters to the vent openings where the tube was.

Align White Filters with DreamWay Vents

Aligns white filters with the DreamWay's bottom vents for proper function.

Route Straps to Top of Silicone

Guides the black straps to the top center of the silicone component.

Fasten Hook and Loop Material

Fastens the hook and loop material to secure the strap in the center.

Connect Tube Swivel/Hose

Attaches the tube swivel/hose to the DreamWay with the diffuser strap and filters.

DreamWay Ready for PAP Device Use

Indicates the DreamWay is ready for connection and use with a PAP device.

DreamWay Cleaning and Maintenance

Advises on cleaning procedures, keeping the strap attached during washing.