Form No. SJ-GFC-612-880E-M
RECLINABLE SLING PATIO CHAIR
GFC-612
READ THIS BEFORE ASSEMBLING & USING THIS PRODUCT
OPENING CHAIR INSTRUCTIONS (Fig. 1 – Fig. 6):
1. Stand behind the chair. Place one hand on a corner frame of the
chair’s backrest while placing the other hand on the same side’s
armrest.
2. Pull the backrest towards you while pushing the armrest away. Do this
until the chair is fully reclined.
3. Attach the pillow. (See page 3.)
4. The Reclining Sling Chair can be adjusted to 6 different positions.
To adjust the recline position: sit in the chair, away from the backrest
(closer to the edge of the seat), while leaning forward. Simultaneously,
pull both armrests up and away from you. Once you have your desired
reclined position, release both armrests at the appropriate locking
notches (located underneath the armrests). Before using the chair
at the desired reclined position, make sure both armrests and the
backrest are secure.
ATTENTION: Be aware of pinch points, which may cause injury. They
form when two parts of the chair frame meet. Examples of pinch points
of this chair include underneath the armrest; backrest frame and seat
frame fold together, and the base frames folding together Exercise
caution when using your chair especially when closing it, which increases
the number of pinch points.
Make sure your Reclining Sling Chair is completely unfolded before
sitting in. Body shape and weight will affect the way this Reclining Sling
Chair operates. Be careful and proceed with caution. To reduce the risk
of injury, do not play on, stand, or jump on the Reclining Sling Chair. The
Reclining Sling Chair is intended for sitting only.
1.
Fig. 1
Fig. 2
Fig. 3
Fig. 5
Fig. 4
To Next Page
Need help?
General
