Need help?Do you have a question about the Bliss AM and is the answer not in the manual?
General| Material | Brass |
|---|---|
| Finish | Chrome |
| Installation Type | Deck Mounted |
| Number of Holes | 3 |
| Handle Type | Lever |
| ADA Compliant | Yes |
| Product Type | Bathroom Faucet |
Mark wall location, drill holes, and install overhanging supports with self-drilling screws.
Install profiles into supports, mark right wall holes, prepare holes, and fasten with tappers.
Fasten the installed upper and lower profiles to the wall using screws.
Attach the hinges securely to the glass door panel.
Mount the fixed part of the hinge onto the bottom profile of the screen frame.
Position the door into the lower profile first, then engage it into the upper profile.
Attach the magnet strap to the edge of the glass door.
Adjust the door to its proper vertical orientation.
Fit the side sealer and the sealer for the bottom edge of the door.
Attach the door handle to the glass door.
Insert the magnet strap into the wall-mounted profile.
Close door, adjust profile for smooth movement, then fasten it.
Mark holes for the wall-mounted profile, prepare holes, and fasten it to the wall.
Seal metal frame and wall joints with silicone sealer for durability and appearance.
To Next Page