1. Switch on the main switch on all lifting units and unlock the
emergency stop.
2. Assign the appropriate position on the vehicle to all lifting units
and register for group operation.
3. Group all lifting units into one group.
4. Lift the vehicle until all safety catches have released.
5. Lower the vehicle by pressing the button continuously.
The lowering movement will stop automatically at a distance of
about 30 cm above the ground. To completely lower, release
the key, then press again. The vehicle continues to lower, while
emitting a beep sound.
6. Or: Lower the vehicle by pressing the button continuously at
30% of the normal lowering speed.
7. After fully lowering the vehicle, turn off the lifting units at the
main switch.
8. Activate the parking brake on the vehicle.
Remove all lifting units from the vehicle, and remove all
obstacles, so that the vehicle can drive away freely.
10.5.7 Switch off
After completion of the work
1. Switch off the lifting units at the main switch.
2. Park at a defined place.
3. Secure against unauthorised use.
4. Charge batteries. (→ 10.9)
To Next Page
Loading...
